Ürün No. 641505
Color SF
Yosun ve mantar oluşumuna yatkın yüzeyler için film korumalı, silikon reçine takviyeli dış cephe boyası
Ürün varyantları
İndirilebilir Dökümanlar
Teknik Özellikler
Uygulama Alanları
- Porous, mineral building materials in outdoor areas
- Load-bearing silicate, silicone and matt dispersion coatings
- Synthetic resin renders
Özellikler
- Highly water-repelling w ≤ 0.1 kg/(m² ∙ h0.5)
- Highly water vapour diffusible sd ≤ 0.14 m
- Low-stress
- Matt, mineral character
- Substrate requirements: Dry, clean, free of dust and cracks and capable of supporting a load. Free of salts known to be damaging to building materials.
- Preparations: Use Primer Hydro HF to prime mineral substrates capable of supporting a load. Use Primer Hydro HF to prime any sanding, firmly adhering substrates. If necessary, adjust the texture using Color LA Fill.
- Application requirements: Temperature of material, surroundings and substrate: min. + 5 °C to max. + 25 °C
- Stir well. Coat the surface using a suitable tool. Apply the material in 2 coats, depending on the condition of the substrate. Wait at least 6 hours between coats.
- Take appropriate measures to protect adjacent building elements and materials that should not come into contact with the product. When coating continuous surfaces, only use materials with the same batch number. Intensive colours, such as yellow, red, etc. may have a lower hiding power due to their pigments. Apply an additional coat if required. Protect freshly treated surfaces from driving rain, wind, sunlight and condensation.
- Brush, flat brush, lambswool roller and airless sprayer
- Clean tools with water while the material is still fresh. Clean splashed material with water while the material is still fresh.
- If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 12 months.
- Approx. 0,2 - 0.3 l/m² per application
- 2 coats required. Application rates may vary depending on the condition of the surface. Apply to a large enough trial area to determine the precise amount required.
- Current regulations and legal requirements must be taken into account and deviations from these must be agreed separately. The relevant test certificates must be observed when planning and carrying out work. Always set up a trial area/trial areas first.
- Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.
- For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.