Ürün No. 684931
Epoxy FK-100
Emülsifiye edilebilir bağlayıcı
Ürün varyantları
İndirilebilir Dökümanlar
Teknik Özellikler
Uygulama Alanları
- Production of compression-resistant mortar for levelling height differences, as a repair mortar and as an epoxy screed.
- Primer, bonding layer on problematic substrates in combination with industrial ceramics
- Binder for bonding layers, joint sealers and epoxy joint sealing compound
Özellikler
- Can be subjected to mechanical loads
- Can be subjected to chemical loads
- Substrate requirements: The substrate must be firm, dimensionally stable, capable of bearing loads and free of loose constituents, dust, oil, grease, rubber marks and other substances that could interfere with adhesion. The tensile strength of the surface of the substrate must be at least 1.5 N/mm² on average (smallest individual value of at least 1.0 N/mm²), and the compressive strength must be at least 25 N/mm². Substrates must have reached their moisture balance and must also be protected against moisture penetration from the reverse side, including during use.
- Preparations: Prepare the substrate by suitable means, e.g. steel ball jetting or diamond grinding, so that it meets the requirements specified above.
- Combination container: Add the entire quantity of the hardener (component B) to the base compound (component A). Mix thoroughly with a slow-speed electric mixer (approx. 300 - 400 rpm). Pour the mixture into a separate container and mix again thoroughly. Mix for at least 3 minutes. Insufficient mixing is indicated by streaks forming.
- As a general principle, higher temperatures will reduce and lower temperatures will increase the times stated.
- Smoothing trowel, notched trowel, notched squeegee, rubber squeegee, epoxy roller, mixing equipment
- More detailed information can be found in the Remmers Tool Programme. Clean tools, equipment and splashed material immediately while fresh with V 101. Take suitable protective and waste disposal measures when cleaning.
- If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 24 months.
- See application examples
- P: Apply the mixed resin generously to the surface. Distribute with a suitable tool, e.g. rubber blade, and work into the substrate with an epoxy roller so that pores in the surface of the substrate are completely filled. approx. 0.30 - 0.50 kg/m² binder (depending on substrate)
- EM: Spread and smooth out the filled material (up to 1 : 10 parts by weight) with a smoothing trowel. Per mm layer thickness: approx. 0.2 kg/m² binderand 2.00 kg/m² suitable quartz sand grading curve such as SelectMix RMS
- Unless otherwise specified, all of the values and application rates given above have been determined under laboratory conditions (20 °C). Slight deviations from these values may arise if the product is worked with on site. Primers must always be applied so that all pores are filled; it may therefore be necessary to increase the application rate or to apply a second coat. When coating continuous surfaces, only use materials with the same batch number as slight differences in colour, gloss and texture may occur. Abrasive mechanical loads leave traces of wear. Epoxy resins are generally not colourfast when exposed to UV light or weather. Cured material can only be removed mechanically. Further notes on working, system construction and maintenance of the listed products can be found in the latest Technical Data Sheets and the Remmers system recommendations.
- Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.
- For professional users only! For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet and the brochure entitled "Epoxy Resins in the Construction Industry and the Environment", issued by Deutsche Bauchemie e.V. (3rd edition 2022).