Ürün No. 57325
FM Historic
Özel olarak formüle edilmiş derz harcı
Ürün varyantları
İndirilebilir Dökümanlar
Broşürler
Teknik Özellikler
Uygulama Alanları
- Renovating joints on historic masonry
Özellikler
- Reproduction of the original state in accordance with monument preservation targets
- Specially adapted binder
- Specially adapted grain size distribution
- Can be made hydrophobic
- Substrate requirements: Clean, dust-free and capable of supporting a load.
- Preparations: Pre-wet the substrate so that it is slightly moist.
- Apply the jointing in two layers if possible, press in the jointing mortar and level flush but do not "iron". After application, work with a profiling tool (e.g. tubing).
- Only mix as much mortar as can be used within approx. 2 hours. Once it has hardened, mortar must not be made workable again by adding either water or more wet mortar. Protect wet mortar surfaces against frost, rain and drying out too quickly for at least 4 days.
- Mixing tool, trowel, jointing iron Clean tools with water while the material is still fresh.
- If stored in an unopened container and in a dry place, the product will keep for approx. 12 months.
- Dependent on building and formulation
- The colour that is obtained after drying and hardening depends on the ambient conditions and the processing method. For instance, a freshly smoothed surface will be lighter than one that is smoothed later or roughened. Different grain sizes of the same product may lead to slight differences in colour. Substrates soaked from the back may cause discolouration. The mixing water must be of drinking water quality. May contain traces of pyrite (iron sulphide). Do not use on gypsum-based substrates. Low chromate content in accordance with Directive 2003/53/EC. The characteristic data of the product were calculated under laboratory conditions at 20°C and 65% relative humidity.
- Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.
- For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.