Ürün No. 495401
Funcosil Test Set
Hidrofobik emprenyelerin su emme ve etkinlik kontrolü için tahribatsız test ekipmanı
Ürün varyantları
İndirilebilir Dökümanlar
Broşürler
Uygulama Alanları
- Non-destructive testing of water absorption/time unit
- Checking the effectiveness of hydrophobising agents
- Can be used to estimate the water absorption coefficient according to DIN EN 772-11
Özellikler
- Contents:6 x Funcosil test tubes1 x Funcosil test plate1 x digital stopwatch1 x sprayer (polyethylene)1 x palette knife (width 30 mm)1 x butyl rubber (fixing)
- Substrate requirements: Clean and dry the bonding surfaces of the Funcosil test tube/test plate. Remove any substances that could impair adhesion from the surface of the building material being tested.
- Preparations: Fix the test tube or test plate in position by placing butyl rubber between the contact surface of the tube and the surface of the building material.
- Conducting the measurement - Fill the test tube with tap water up to the top graduation mark. - Use the stopwatch to measure the amount of water that penetrates the building material in a period of e.g. 30 seconds, 1, 2, 3, 4, 5, 6, 10 and 15 minutes, and record the results. - When a fill level of 3 ml is reached, refill the test tube. Record this water volume. - Once the test is complete, carefully detach the test tube from the base using a filling knife. Refilling the test tube .When the level reaches 3 ml, refill the stand tube. Record this amount of water. After completion of the test, carefully remove the test tube from the substrate with a trowel. For detailed information regarding the application, please refer to the data sheet "Implementation Instructions".
Tüketim bilgisi mevcut değil.
- For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.