Ürün No. 47611
ICS-2K
Ultra ince, iki bileşenli enjeksiyon macunu
Ürün varyantları
İndirilebilir Dökümanlar
Teknik Özellikler
Uygulama Alanları
- Dry, damp, wet, underwater and underground areas
- Injection into cracks in concrete
- Filling cracks and cavities
- Strengthening in the subsoil
Özellikler
- Low viscosity (very good flow properties)
- Low shrinkage
- High sulphate resistance and low active alkali content (SR/NA)
- High early strength
- Water impermeable
- Freeze/thaw-resistant
- Substrate requirements: Drilling channel must be free of drill dust.
- Preparations: Strengthening hollow masonry Creation of drill holes: diameter 18 - 30 mm, angle of inclination approx. 45°, hole depth up to max. 5 cm from end of wall.
- Application requirements: Temperature of the material, air and substrate: from min. +5 °C to max. +30 °C
- Pressureless, via funnel. Inject using suitable injection equipment and injection packers.
- Do not mix with other products. The flowability of mortar that has begun hardening within the processing time can be restored by mixing the mortar again.
- Mixer, injection device, packers (e.g. Desoi packers and equipment or Polyplan packers and pumps)
- Clean tools with water while the material is still fresh.
- If stored in an unopened container and in a dry place, the product will keep for approx. 12 months.
- Approx. 1.7 kg/l void
- Do not use on gypsum-based substrates. The characteristic data of the product were calculated under laboratory conditions at 20°C and 65% relative humidity. Current regulations and legal requirements must be taken into account and deviations from these must be agreed separately. The relevant test certificates must be observed when planning and carrying out work.
- Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.
- For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.