Ürün No. 28346620
Induline GW-311
Su bazlı, iç ve dış mekan ahşap yapı elemanları için dekoratif, ince katmanlı ahşap boyası
Ürün varyantları
İndirilebilir Dökümanlar
Teknik Özellikler
Uygulama Alanları
- For use on interior and exterior wood
- Soft and hard woods
- Building elements with no or limited dimensional stability
Özellikler
- Quick drying: 2 coats can be applied in one day
- Breathable
- Does not flake
- Repels water
- Pleasant feel
- Uniform varnished finish
- The clear variant does not protect against UV radiation (grey discolouration)
- Substrate requirements: The substrate must be clean, dry, free of dust, grease and loose substances, and prepared in the correct manner. Wood building elements with limited or no dimensional stability: wood moisture content max. 18%
- Preparations: If necessary, impregnate non-resistant woods with a wood preservative* (*Use biocides safely. Always read the label and product information before use).
- Application requirements: Temperature of the material, air and substrate: from min. +15 °C to max. +30 °C.
- Stir well, including during application or after a break in work. Application by brush, dipping, flow coating, spraying. Industrial series production (VACUMAT® vacuum processing, brushing equipment) Apply the second coat after 2-3 hours. A third coat is recommended on particularly exposed surfaces. When allowed to dry overnight, intermediate sanding is required. Seal opened containers well and use contents as soon as possible.
- Check colour, adhesion and compatibility with the substrate by setting up a trial area. Ensure good ventilation. Observe the information sheets “Upkeep and Maintenance of Dipping Tanks and Flow Coating Facilities” and “Information on Workplace Hygiene”.
- Drying: Ready for next coat: after approx. 2.5 hours Practice values at +20 °C and 65% relative humidity. Low temperatures, poor ventilation and high humidity delay drying.
- Thinning: Ready to use
- Brush, sprayer, dipping tank, flow coating equipment, vacuum processing equipment, brushing machine
- Clean tools with water or Aqua RK-898 Cleaning Concentrate immediately after use. Ensure that any residue from cleaning is disposed of correctly.
- If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 12 months.
- 80 - 120 ml/m² per coat
- On planed larch and softwoods with a high resin content, the coating may have reduced adhesion and resistance to weathering. This is especially the case on horizontal year rings, knots and areas of winter growth that are high in resin. Maintenance must be carried out more frequently on these surfaces.The only remedy for this is pre-weathering or very coarse sanding (P80).If these wood types are rough-sawn, considerably longer maintenance intervals are to be expected. Observe the information sheets “Upkeep and Maintenance of Dipping Tanks and Flow Coating Facilities” and “Information on Workplace Hygiene”.
- Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.
- For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.