Ürün No. 16401
iQ-Therm 2.0 K-50
iQ-Therm 2.0 sisteminde kama şeklinde iç yalıtım paneli
Ürün varyantları
İndirilebilir Dökümanlar
Broşürler
Teknik Özellikler
Uygulama Alanları
- Energy efficiency upgrades
- Mould control and prevention in existing buildings
- Implementation of the hygienic minimum heat insulation level in existing buildings
- Improving the room climate by increasing the wall surface temperature
- Compensation of thermal bridging effects in ceiling and wall connection areas
- Optical correction of butt joints
Özellikler
- Excellent thermal insulation
- Thermal conductivity (nominal value) approx. 0.027 W/(m²*K)
- Low construction height
- Easy to apply
- Thermal insulation material according to DIN 4108-10
- Substrate requirements: The substrate must be load-bearing, even, clean, dry and free from adhesion-reducing substances.
- Preparations: Level off and even out highly uneven substrates – use SP Level to close up joints and even out surfaces.
- Pre-wet the substrate. Apply iQ M universal to the substrate as a scratch coat. Use a notched trowel to apply iQ M universal wet-on-wet to the back of the wedge and the substrate. Position and press on the boards from the bottom up. Align using a floating rule.
- Mark the desired dimensions on the board. Cut to size using a cutter knife. Rework the cut edges with a rasp or file if necessary. Avoid cross joints. Align using a floating rule. Make sure that full-surface bonding is achieved.
- Cutter knife
- Dry and frost-free.
- Approx. 1.4 panels/m²
- Current regulations and legal requirements must be taken into account and deviations from these must be agreed separately.