Ürün No. 369003
PUR Aqua Top 1K
Şeffaf sabitleme katmanı
Ürün varyantları
İndirilebilir Dökümanlar
Broşürler
Teknik Özellikler
Uygulama Alanları
- Fixing Remmers flake coatings
Özellikler
- Quick drying
- Lightfast
- Water vapour diffusion capable
- Substrate requirements: The substrate must be firm, dimensionally stable, capable of bearing loads and free of loose constituents, dust, oil, grease, rubber marks and other substances that could interfere with adhesion. Use only as a fixation layer on Remmers flake coatings.
- Application requirements: Temperature of the material, air and substrate: from min. +10 °C to max. +25 °C.
- The times given are reduced at higher temperatures and increased at lower temperatures, in particular in combination with high humidity.
- 25 cm epoxy roller
- More detailed information can be found in the Remmers Tool Programme. Clean tools, equipment and any splashed material immediately with water while still fresh. Take suitable protective and waste disposal measures when cleaning.
- If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 12 months.
- approx. 0.15 - 0.25 l/m² binder
- FFFL: Apply the material generously to the surface. Using a suitable 25 cm epoxy roller, evenly spread the material crosswise until the surface is fully covered. The fixed surface must be sealed with PUR Aqua Top 500 2K M or PUR Aqua Top 2K SG. approx. 0.15 - 0.25 l/m² binder
- Unless otherwise specified, all of the values and application rates given above have been determined under laboratory conditions (20 °C). Slight deviations from these values may arise if the product is worked with on site. Use sufficiently experienced personnel to ensure that surfaces are as even as possible. Uneven application, strong draughts and large temperature differences on the surface can result in a non-uniform surface appearance due to differences in the degree of gloss. Only suitable for interior rooms with no exposure to moisture. Further notes on working, system construction and maintenance of the listed products can be found in the latest Technical Data Sheets and the Remmers system recommendations.
- Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.
- For professional users only! Further information concerning safety during transport, storage and handling as well as on disposal and ecology can be found in the latest Safety Data Sheet.