Ürün No. 64305
RM GM M20
Derin kayıp alanları doldurmak için mineral taş ikame harcı
Ürün varyantları
İndirilebilir Dökümanlar
Teknik Özellikler
Uygulama Alanları
- Core construction underneath restoration mortars, in deep missing areas
Özellikler
- Low free alkali content
- Good flank adhesion
- Low inherent stress
- Substrate requirements: Clean, dust-free and capable of supporting a load.
- Preparations: Any necessary cleaning measures should be performed as gently as possible, e.g. by spraying with cold or hot water or steam cleaning; stubborn dirt should preferably be cleaned using the rotec soft blasting method or Remmers cleaning products (e.g. Clean FP, Clean AC basic, Clean WR). Preserve valuable heritage ornamental elements and statues by carefully removing encrusted dirt and using the appropriate Remmers Stone Strengthener to carry out repeated intensive strengthening.
- Apply a contact layer to the pre-wetted substrate using grout (dry mortar/water) in a layer thickness of approx. 2 mm. Apply mortar in layers from 1.5 cm to 3 cm thick into the contact layer while wet. Once the material has hardened sufficiently (when the grain "pops"), roughen the surface. Wait at least 24 hours before applying subsequent layers.
- Once it has hardened, mortar must not be made workable again by adding either water or more wet mortar. Protect wet mortar surfaces against frost, rain and drying out too quickly for at least 4 days.
- Mixing tool, trowel, smoothing trowel Clean tools with water while the material is still fresh.
- If stored in an unopened container and in a dry place, the product will keep for approx. 12 months.
- Approx. 1.8 kg/l cavity volume
- Apply to a large enough trial area to determine the precise amount required.
- May contain traces of pyrite (iron sulphide). Low chromate content in accordance with Directive 2003/53/EC. The characteristic data of the product were calculated under laboratory conditions at 20°C and 65% relative humidity. Current regulations and legal requirements must be taken into account and deviations from these must be agreed separately. The relevant test certificates must be observed when planning and carrying out work.
- Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.
- For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.