Ürünler

Ahşap Koruma

Uygulamalar

Endüstriler

Zanaat

Endüstri

Hizmetler

Remmers Uluslararası Garanti (RIG)

RIG Su Yalıtımı

Bilgi Materyalleri

Planlama ve İhale

Ürün No. 480301

Tape VF-250 XA

NBR bazlı, dokusuz yüzey kaplamalı, 30 mm kendinden yapışkanlı şeritlere sahip yüksek kaliteli premium sızdırmazlık bandı.

Ürün varyantları

İndirilebilir Dökümanlar

Uygulama Alanları

Uygulama Alanları
  • Interior and exterior use
  • Connection and integration of flexible polymer-modified thick coatings with non-mineral building materials and connection areas such as plastic, metal and wood
  • Plinth waterproofing
  • Waterproofing in a bond

Özellikler

  • Flexible
  • 30 mm self-adhesive strip with high adhesive strength
  • Special non-woven fabric coating
  • Substrate requirements: Clean, dust-free and capable of supporting a load.
  • Preparations: Remove projecting seams and mortar remains. Remove gravel packets and fill cavities. Clean non-mineral substrates until they are free from residues and degrease; roughen if necessary. Create a scratch coat of waterproofing material on mineral and roughened substrates. Refer to the current Technical Data Sheet for detailed information on the single products.
ApplicationApplication
  • Fix the joint tape to the prepared substrate with the self-adhesive strip. Apply waterproofing material as contact layer, work in Water Stop over the entire surface. In corner areas, Interior Corner VF and Exterior Corner VF are placed so that they overlap the water stop. In areas where pipes pass through walls, Wall Gasket VF or a shaped piece made of Water Stop VF 500 can be used. Depending on the waterproofing product used, the 2nd and 3rd layer of waterproofing is applied over the entire surface.
Working tools / cleaning
  • Clean tools with water while the material is still fresh.
Storage / shelf lifeStorage / shelf life
  • Virtually unlimited when stored dry at room temperature and protected from direct sunlight.

Tüketim bilgisi mevcut değil.

  • The current technical regulations must be observed. Current regulations and legal requirements must be taken into account and deviations from these must be agreed separately. The relevant test certificates must be observed when planning and carrying out work. Always set up a trial area/trial areas first.
  • The product must be disposed of in accordance with the official regulations.