Ürünler

Ahşap Koruma

Uygulamalar

Endüstriler

Zanaat

Endüstri

Hizmetler

Remmers Uluslararası Garanti (RIG)

RIG Su Yalıtımı

Bilgi Materyalleri

Planlama ve İhale

Ürün No. 507501

Tape VF-500

Yüksek kaliteli, nitril kauçuk esaslı ve dokusuz yüzeyli (non-woven) kumaş kaplı birinci sınıf yalıtım bandı

Ürün varyantları

Uygulama Alanları

Uygulama Alanları
  • Interior and exterior use
  • Plinth waterproofing
  • Connection and integration of flexible polymer-modified thick coatings with non-mineral building materials and connection areas such as plastic, metal and wood

Özellikler

  • Highly flexible
  • High expansion capability and elastic recovery
  • Special non-woven fabric coating
  • Substrate requirements: Clean, dust-free and capable of supporting a load.
  • Preparations: Remove projecting seams and mortar remains. Remove gravel packets and fill cavities. Clean non-mineral substrates until they are free from residues and degrease; roughen if necessary. Create a scratch coat of waterproofing material on mineral and roughened substrates. Refer to the current Technical Data Sheet for detailed information on the single products.
Application
  • Apply waterproofing material as contact layer, work in Water Stop over the entire surface. Depending on the waterproofing product used, the 2nd and 3rd layer of waterproofing is applied over the entire surface.
  • The permissible application temperatures depend on the product properties of the waterproofing products used. Apply the waterproofing material crosswise in relation to the tape. The tape must not be damaged.
Working tools / cleaning
  • For cutting: scissors or knifeFor waterproofing: roller, wide brush or filling knife
  • Clean tools with water while the material is still fresh.
Storage / shelf lifeStorage / shelf life
  • Virtually unlimited when stored dry at room temperature and protected from direct sunlight.
Usage
  • According to needs
  • The current technical regulations must be observed. Current regulations and legal requirements must be taken into account and deviations from these must be agreed separately. The relevant test certificates must be observed when planning and carrying out work. Always set up a trial area/trial areas first.
  • The product must be disposed of in accordance with the official regulations.